Application Note

Measure total protein in cell lysates with SpectraMax ABS Plus Microplate Reader

  • Accurately assay protein concentrations with minimal incubation time
  • Obtain results quickly with the 8-channel read head
  • Plot standard curves and calculate sample protein concentrations automatically with preconfigured protocols in SoftMax Pro Software

Download PDF

Introduction

Joyce Itatani | Applications Scientist | Molecular Devices
Cathy Olsen, PhD | Sr. Applications Scientist | Molecular Devices

Quantification of protein concentrations from cell lysates is a key step for many downstream applications, such as western blots and enzyme-linked immunosorbent assays (ELISAs). Two of the most popular assays are colorimetric, relying on a color change in a reagent in the presence of protein. The Bradford protein assay is based on the absorbance shift in Coomassie blue dye from 465 nm (unbound) to 595 nm (bound). The bicinchoninic acid assay (BCA) relies on two reactions: (1) protein reduces Cu2+ to Cu1+ and (2) bicinchoninic acid binds to Cu1+, forming a purple-colored complex that strongly absorbs light at 562 nm.

Here we describe the use of the Pierce Rapid Gold BCA and Pierce Detergent Compatible Bradford assays to quantitate total protein in cell lysates. The standard BCA assay requires a 30-minute incubation at 37°C, but the Rapid Gold BCA assay only requires a 5-minute incubation at room temperature, and absorbance is measured at 480 nm. The detergent compatible Bradford assay overcomes problems encountered when Coomassie dye is used with cells lysed in buffers containing detergents.

Both assays were read on the SpectraMax® ABS Plus Microplate Reader. Preconfigured protocols in SoftMax® Pro Software were used to acquire data and plot standard curves from which the concentrations of cell lysates were determined. Both the Rapid Gold BCA assay and the detergent compatible Bradford assay gave similar results with the cell lysates used.

Materials

Note – For the assays described here, similar results are obtained with the SpectraMax ABS and SpectraMax PLUS 384 Microplate Readers

Methods

Cell lysate preparation

Media was aspirated from a T-75 flask of CHO-K1 cells, and cells were washed with 10 mL of cold PBS with calcium and magnesium. After PBS was aspirated, 2 mL of RIPA buffer was added to the flask, and cells were incubated for 5 minutes at room temperature to ensure complete lysis. Halt protease inhibitor was added to the lysate at a final concentration of 1X. The lysate was divided and transferred into two 1.5 mL microcentrifuge tubes and centrifuged at 14,000 rpm for 20 minutes. A 1:3 dilution series of the supernatant was made in PBS to test performance of the assays over a range of cell and lysis buffer concentrations.

Standard curves

For both protein assays, bovine serum albumin (BSA) standards ranging from 25 µg/mL to 2000 µg/mL were prepared according to the assay kit instructions.

Rapid Gold BCA assay

20 µL of BSA standard or cell lysate was pipetted into wells of a 96-well microplate (n = 3), followed by 200 µL of Working Reagent (50:1 Reagent A:Reagent B). The plate was placed on a shaker for 30 seconds to mix contents, and then incubated for five minutes at room temperature without shaking. Absorbance was read at 480 nm on the SpectraMax ABS Plus reader.

Detergent Compatible Bradford assay

10 µL of BSA standard or cell lysate was pipetted into wells of a 96-well microplate (n = 3). 300 µL of Detergent Compatible Bradford reagent was added to each well. Contents of wells were pipetted up and down several times to mix. The plate was incubated for 10 minutes at room temperature and read at 595 nm on the SpectraMax ABS Plus reader.

Data analysis

Standard curves were plotted using the quadratic curve fit in SoftMax Pro Software, and the concentrations of cell lysates were calculated from the standard curves by the software.

Results

BSA standard curves for the Rapid Gold BCA and Detergent Compatible Bradford assays are shown in Figure 1. SoftMax Pro Software automatically calculated cell lysate concentrations from the standard curve for each assay.

BSA standard curves for the BCA Rapid Gold assay

Figure 1. BSA standard curves for the BCA Rapid Gold assay (red plot, r2 = 1.000) and Detergent Compatible Bradford assay (blue plot, r2 = 0.999).

Figure 2 shows the data table obtained for the Rapid Gold BCA assay, with concentrations calculated for each dilution of the cell lysate. The average concentration of cell lysate was calculated to be 683 µg/mL. Figure 3 shows the data table for the Detergent Compatible Bradford assay with average concentration calculated to be 673 µg/mL, similar to the BCA assay result.

Sample
Wells
Dilution Factor
OD Value
R
Concentration
Mean Conc
SD
CV
AdjConc
01

E1

F1

G1

1.000

0.355

0.996

0.403

239.916

692.080

272.547

401.514
252.166
62.8
401.514
02

E2

F2

G2

3.000

0.395

0.356

0.322

266.970

240.998

218.043

242.004
24.479
10.1
726.011
03

E3

F3

G3

9.000

0.151

0.124

0.116

103.796

85.800

80.931

90.176
12.004
13.4
811.580
04

E4

F4

G4

27.000

0.044

0.039

0.030

33.386

30.517

24.327

29.410
4.630
15.7
794.073

Mean Adjusted Result: 683.3 Figure 2. Rapid Gold BCA assay results. SoftMax Pro Software data table shows the calculated concentrations of serially diluted cell lysate.

Sample
Wells
Dilution Factor
OD Value
R
Concentration
Mean Conc
SD
CV
AdjConc
01

E1

F1

G1

1.000

0.224

0.225

0.188

216.035

216.679

178.309

203.674
21.969
10.8
203.674
02

E2

F2

G2

3.000

0.217

0.225

0.251

208.432

217.537

245.221

223.730
19.160
8.6
671.190
03

E3

F3

G3

9.000

0.117

0.111

0.107

104.006

98.128

94.286

98.806
4.895
5.0
889.258
04

E4

F4

G4

27.000

0.050

0.051

0.039

37.286

38.564

27.182

34.344
6.235
18.2
927.291

Mean Adjusted Result: 672.9 Figure 3. Bradford assay results. SoftMax Pro Software data table shows calculated concentrations of cell lysate with the Detergent Compatible Bradford assay.

Conclusion

The Pierce Rapid Gold BCA and Pierce Detergent Compatible protein assays provide users easy methods for quantification of total protein in cell lysate samples without long incubation times or worries over the effects of detergent in lysis buffers. The Rapid Gold BCA assay yielded a more linear standard curve and more consistent results over a range of diluted cell lysates, but overall results were similar for both kits.

The SpectraMax ABS Plus reader with SoftMax Pro Software offers a complete solution for data acquisition and analysis, with preconfigured protocols that plot standard curves and calculate sample concentrations automatically. With the Speed Read setting, a 96-well plate can be read in just five seconds, further streamlining the process of protein quantification.

Download PDF